-->
2014 Catalogs
Font Size
Buy Now
Buy Now
Online Dealers
Where to Buy

Performance Series Amplifiers

DA602
DA304
DA604
DA904
DA4001
DA6001
DA8001
Click to enlarge Click to enlarge Click to enlarge Click to enlarge Click to enlarge Click to enlarge Click to enlarge
Specifications DA602 DA304 DA604 DA904
Number of channels 2 4 4 4
RMS Power @ 4Ω 60 Watts x 2 40 Watts x 4 60 Watts x 4 90 Watts x 4
RMS Power @ 2Ω 100 Watts x 2 65 Watts x 4 100 Watts x 4 140 Watts x 4
RMS Power Bridged @ 4Ω 215 Watts x 1 160 Watts x 2 215 Watts x 2 360 Watts x 2
Peak Power 380 Watts 500 Watts 650 Watts 1100 Watts
Frequency Response 10Hz - 35kHz 10Hz - 35kHz 10Hz - 35kHz 10Hz - 35kHz
Signal to Noise Ratio >90dB >90dB >90dB >90dB
Dims (H x W x D) 2" x 9.3" x 7.9" 2" x 9.3" x 9" 2" x 9.3" x 7.9" 2" x 9.3" x 11.8"



Specifications DA4001 DA6001 DA8001
Number of channels 1 1 1
RMS Power @ 2Ω 850 Watts 1200 Watts 1500 Watts
RMS Power @ 1Ω 1200 Watts 1800 Watts 2500 Watts
Peak Power 3200 Watts 4200 Watts 5200 Watts
Frequency Response 20Hz - 150Hz 20Hz - 150Hz 20Hz - 150Hz
Signal to Noise Ratio >80dB >80dB >80dB
Dims (H x W x D) 2" x 9.3" x 11.8" 2" x 9.3" x 14.5" 2" x 9.3" x 17.3"



Features

DA602 Manuals
Class A/B
2 Ohm stereo operation
Tri-mode capable
Bridgeable
Full MOSFET DC-DC PWM Power Supply
4-way protection
High level inputs with auto turn-on
Low-level inputs (RCA)
Variable high-pass crossover (50Hz - 500Hz, @12dB/octave)
Variable low-pass crossover (50Hz - 500Hz, @12dB/octave)
Variable bass boost @45Hz (0dB – 12dB)
Variable gain control
2 AWG power and ground terminal block
4 AWG speaker wire terminal block
Power Requirements: 14.4V DC (11V to 16V)
Input Sensitivity: 250mV - 6V
Frequency Response: 10Hz - 35kHz (-3dB)
Speaker Impedance: 4Ω or 2Ω
Signal to Noise: > 90dB (THD < 0.05% @ Ω, 12V)
THD (RMS): < 0.05
Damping factor: > 250


DA304, DA604, DA904 Manuals
Class A/B
2 Ohm stereo operation
Tri-mode capable
Bridgeable
Full MOSFET DC-DC PWM Power Supply
4-way protection
High level inputs with auto turn-on
Low-level inputs (RCA)
Variable high-pass crossover (50Hz - 500Hz, @12dB/octave)
Variable low-pass crossover (50Hz - 500Hz, @12dB/octave)
Variable bass boost @45Hz (0dB – +12dB)
Variable gain control
2 AWG power and ground terminal block
4 AWG speaker wire terminal block
ower Requirements: 14.4V DC (11V to 16V)
Input Sensitivity: 250mV - 6V
Frequency Response: 10Hz - 35kHz (-3dB)
Speaker Impedance: 4Ω or 2Ω
Signal to Noise: > 90dB (THD < 0.05% Ω, 12V)
THD (RMS): < 0.0
Damping factor: > 250


DA4001, DA6001, DA8001 Manuals
Class D
1 Ohm operation
Full MOSFET DC-DC PWM Power Supply
4-way protection
Low-level inputs (RCA)
Variable low-pass crossover (40Hz - 150Hz, @ 24dB/octave)
Variable bass boost @45Hz (0dB – 18dB)
Variable subsonic filter (20Hz – 50Hz @ 24dB/octave)
Phase shift 0° or 180° (switchable)
Variable gain control
Remote bass control included
2 AWG power and ground terminal block
4 AWG speaker wire terminal block
Amplifier bridge mode to connect 2 amplifiers to one sub
Power Requirements: 14.4V DC (11V to 16V)
Input Sensitivity: 250mV - 6V
Frequency Response: 20Hz - 150Hz (0, -3dB)
Speaker Impedance: 2Ω or 1Ω
Signal to Noise: > 80dB (THD < 0.5% @ Ω, 12V)
THD (RMS): < 0.5 %
Damping factor: > 100