7″ AV Media Receiver with Apple CarPlay and Android Auto – XDCPA10BT
Authorized Retailer:
Wired Apple CarPlay and Android Auto
Play music, make calls, and check the traffic.
Audio plays via your car’s speakers.
Use Your Phone’s Assistant a dedicated voice activation button summons the virtual assistant on your smartphone.
Additional Features
Amplifier-Ready
Want more volume now or down the road? Use the three pair of preamp outputs to add amplifiers for more volume in your system.
200 Watts Peak Power
50 Watts of peak power built-in for each of your 4 speakers.
Fits 2 DIN Openings
The receiver is designed to fit in most 4” x 7” double DIN openings.
Not a CD/DVD Player
Front and Backup Camera Inputs
Add a front and rear camera to get an expanded view behind your vehicle and eliminate blindspots!
Connected Car
With support for both Apple CarPlay™ and Android Auto™ you can control key phone features directly from the receiver’s touchscreen or via voice-control — significantly reducing driver distraction.
Both Apple CarPlay and Android Auto launch upon connecting a compatible phone to the receiver via USB.
| Screen Size |
|---|
Features
- 7″ Extra-large LED backlit touchscreen LCD (1024p x 600p)
- Works with Apple CarPlay™
- Supports Android Auto™
- Built-in Bluetooth with hands-free calling, music streaming with ID3 tags, and phonebook support (HFP, A2DP, AVRCP, PBAP). External microphone.
- AM/FM tuner with 30 stations presets (18FM/12AM)
- Rear USB input with 1.5 Amp fast charging
- Backup camera input (RCA)
- Rear RCA A/V input
- 3 Pair of RCA preamp outputs (Front+Rear+Sub)
- Media playback: USB
- File formats: FLAC/MP3
- Digital media unit – will not play CDs/DVDs
- 8 Band graphic EQ
- 8 EQ presets (Default, Custom, Classic, Rock, Jazz, Electric, Pop, & Soft)
- 200 Watts (50 W x 4) MOSFET
- Steering Wheel Control (SWC) Input (Compatible with most SWC Interfaces)
Manuals (PDFs)
Firmware
THIS UPDATE ADDRESSES THE FOLLOWING:
- Improves the screen resolution while in Apple CarPlay or Android Auto
- Adds programmable volume setting in the Settings menu
- Adds Right-Hand Drive setting for CarPlay and Android Auto in the Settings menu
Note: Software is not interchangeable between models. Please do not attempt this update on any other model other than the XDCPA10BT
Download Firmware Update for XDCPA10BT
HOW TO UPDATE:
- Download the firmware file from the link above.
- Unzip the downloaded file.
- Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
- With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the XDCPA10BT USB Port.
- Turn the vehicle On, the radio will boot up with the update screen.
- Once the update is complete, the radio will shut down and power back up.
- Remove the USB Thumb Drive from the unit.
- The update is now complete.
To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly.
– Version: XDCPA10BT V1.2
– Date: 20220811_1110
– SDK: 24.0.2.2.2.0.1.0
– Mcu: SP_24_20201112_01