1. Product: 9″ AV Media Receiver with Apple CarPlay and Android Auto – DCPA901 (ID: 958)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa901/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING: IMPROVES THE SCREEN RESOLUTION WHILE IN APPLE CARPLAY OR ANDROID AUTO Note: Software is not interchangeable between models. Please do not attempt this update on any other model other than the DCPA901 Download Firmware Update for Screen Resolution Issue (Zip File) HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the DCPA901 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: DCPA901 V1.0 - Date: 20210616_1058 - SDK: 24.0.2.2.2.0.1.0 This Update Addresses The Following: Adds Camera Icon to Main Menu for Camera Always On Feature Note: Software is not interchangeable between models. Please do not attempt this update on any other models other than the DCPA901 Download Firmware Update for DCPA901 Camera Icon Update (Zip File) To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: DCPA901 V1.0 - Date: 20220830_0910 - SDK: 24.0.2.2.2.0.1.0

Pass
2. Product: 7″ AV Car Receiver with Apple CarPlay and Android Auto – DCPA701 (ID: 1118)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa701/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING: IMPROVES THE SCREEN RESOLUTION WHILE IN APPLE CARPLAY OR ANDROID AUTO Note: Software is not interchangeable between models. Please do not attempt this update on any other model other than the DCPA701 Download DCPA701 Firmware Zip File HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the DCPA701 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: DCPA701 V1.0 - Date: 20210513_1806 - SDK: 24.0.2.2.2.0.1.0

Pass
3. Product: 7″ AV Car Receiver with Wireless Apple CarPlay and Android Auto – DCPA701W (ID: 1214)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa701w/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    • Fixes an issue when using the Waze app
    • Improves USB random playback issue
    Download Firmware for DCPA701W (Zip File) HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the DCPA701W USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    7. Delete the 2 ISPBOOT files from the thumb drive and place the sppf_Autochips.img and DownLoad.bin file onto the USB stick and repeat the same update.
    8. The updates are now completed.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: DCPA701W - Date: 20210904_1712 - SDK: 53.0.5.0.0.0.2.1 - MCU: SP_A_303_20210806_01.AJO.E THIS UPDATE ADDRESSES THE FOLLOWING:
    • Updates GPS location
    Download Firmware for GPS Location Update for DCPA701W (Zip File) HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the DCPA701W USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    7. The updates are now completed.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: DCPA701W - Date: 20220123_1647 - SDK: 53.0.5.0.0.0.2.1 - MCU: SP_A_303_20210806_01.AJO.E

Pass
4. Product: 10.1″ AV Media Receiver with Apple CarPlay and Android Auto – DMCPA11BT (ID: 1224)
Product URL: https://www.dualav.com/product/car/av-receivers/dmcpa11bt/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING: IMPROVES THE SCREEN RESOLUTION WHILE IN APPLE CARPLAY OR ANDROID AUTO Note: Software is not interchangeable between models. Please do not attempt this update on any other models other than the DMCPA11BT Download Firmware Update for DMCPA11BT HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the DMCPA11BT USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit. The update is now complete.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: DMCPA11BT V1.2 - Date: 20210616_1051 - SDK: 24.0.2.2.2.0.1.0

Pass
5. Product: 10″ USB Mirroring AV Media Receiver – XVM1000UI (ID: 1231)
Product URL: https://www.dualav.com/product/car/av-receivers/xvm1000ui/
Firmware Links:

Pass
6. Product: 7″ AV Media Receiver with Apple CarPlay and Android Auto – DMCPA70 (ID: 1235)
Product URL: https://www.dualav.com/product/car/av-receivers/dmcpa70/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING: IMPROVES THE SCREEN RESOLUTION WHILE IN APPLE CARPLAY OR ANDROID AUTO Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the DMCPA70 Download HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the DMCP70 USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: DMCPA70 V1.2 - Date: 20210409_1454 - SDK: 24.0.2.2.2.0.1.0 - MCU: SP_A_3_2021011201

Pass
7. Product: 7″ AV Media Receiver with Apple CarPlay and Android Auto – DMCPA79BT (ID: 1465)
Product URL: https://www.dualav.com/product/car/av-receivers/dmcpa79bt/
Firmware Links:

Pass
8. Product: 6.2″ AV DVD Receiver – XDVD276BT (ID: 1477)
Product URL: https://www.dualav.com/product/car/av-receivers/xdvd276bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • This update allows you to turn off the iPlug App in the settings menu of Bluetooth. (Default is set OFF.)
    USE THIS FIRMWARE UPDATE IF YOUR RADIO STARTS WITH THE FOLLOWING SERIAL NUMBER RANGE AND MANUFACTURERS DATE RANGE ONLY. NSD0179417 - Present Jan 2019 - Present Download Firware Update NSD0001001 - 0179416 Jul 2017 - Dec 2018 Download Firmware Update How to update:
    • Unzip the file Copy all file into the USB thumb drive. Power on the Head unit Insert the USB thumb drive in USB port. "Are you sure" message will pop-up on screen. Press the green check mark to continue.

Pass
9. Product: 7″ AV DVD Receiver – XDVD176BT (ID: 1490)
Product URL: https://www.dualav.com/product/car/av-receivers/xdvd176bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • This update allows you to turn off the iPlug App in the settings menu of Bluetooth. (Default is set OFF.)
    USE THIS FIRMWARE UPDATE IF YOUR RADIO STARTS WITH THE FOLLOWING SERIAL NUMBER RANGE AND MANUFACTURERS DATE RANGE ONLY. NSD0086028 - Present Jan 2019 - Present Download Firmware for XDVD176BT (2019 and newer) NSD0001001 - 0086027 Aug 2017 - Dec 2018 Download Firmware for XDVD176BT (Aug. 2017 - 2018) How to update:
    • Unzip the file Copy all file into the USB thumb drive. Power on the Head unit Insert the USB thumb drive in USB port. "Are you sure" message will pop-up on screen. Press the green check mark to continue.

Pass
10. Product: 6.2″ AV DVD Receiver – XDVD251BT (ID: 1517)
Product URL: https://www.dualav.com/product/car/av-receivers/xdvd251bt/
Firmware Links:

Pass
11. Product: Gauge Hole Media Receiver – MGH37BT (ID: 1571)
Product URL: https://www.dualav.com/product/marine/headunits-marine/mgh37bt/
Firmware Links:
Model number missing from firmware URL
    THIS UPDATE ADDRESSES THE FOLLOWING: 2-ZONE SPEAKER CONTROL How to update:
    1. Copy all file into the USB thumb drive.
    2. Power on the Head unit
    3. Insert the USB thumb drive in USB port.
    4. The firmware will begin automatically
    5. When the firmware has completed, remove the USB thumb dive to resume normal operation.
    To adjust the updated 2-Zone speaker control: Long press Preset/Play/Pause button then it will cycle through the zone selection options as follows.
    1. Factory Default : Zone 1 + Zone 2
    2. Zone 1
    3. Zone 2

Fail
Discrepancy found: Model number mgh37bt not in firmware URL
12. Product: 7″ AV Media Receiver with Apple CarPlay and Android Auto – DMCPA7BT (ID: 2631)
Product URL: https://www.dualav.com/product/car/av-receivers/dmcpa7bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • Improves operation when older phones or non Apple cables are being used to operate the CarPlay feature
    • Improves video screen that may have had digital noise or pixilation when using older phone or non Apple cable
    Download Firmware Update for DMCPA7BT Download Instructions

Pass
13. Product: 6.2″ AV DVD Receiver – DV271BT (ID: 2641)
Product URL: https://www.dualav.com/product/car/av-receivers/dv271bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • This update Fixes a Call Mute issue
    USE THIS FIRMWARE UPDATE IF YOUR RADIO STARTS WITH THE FOLLOWING SERIAL NUMBER RANGE AND MANUFACTURERS DATE RANGE ONLY. NSD0084465 - 87152 Download Firmware Update for DV271BT NSD0076465 - 80464 Download Firmware Update for DV271BT How to update:
    1. Copy all files onto the USB thumb drive.
    2. Power on the Head unit
    3. Insert the USB thumb drive in USB port.
    4. "Are you sure" message will pop-up on screen. Press the green check mark to continue.
    SWC Programming Download Instructions

Pass
14. Product: 7″ AV DVD Receiver – DV715B (ID: 2651)
Product URL: https://www.dualav.com/product/car/av-receivers/dv715b/
Firmware Links:
    <!--FIRMWARE UPDATES AND IMPROVEMENTS:
    • This update Fixes a Call Mute issue
    ALLOWS YOU TO TURN OFF THE IPLUG APP IN THE SETTINGS MENU OF BLUETOOTH. (DEFAULT IS SET OFF) NSD0001001 (March 2019) - Present Download
    1. Unzip the file
    2. Copy all file into the USB thumb drive.
    3. Power on the Head unit
    4. Insert the USB thumb drive in USB port
    5. "Are you sure" message will pop-up on screen. Press the green check mark to continue.
    -->

Pass
15. Product: 7″ AV Media Receiver – XVM296BT (ID: 2704)
Product URL: https://www.dualav.com/product/car/av-receivers/xvm296bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • Fixes volume issues.
    Download Firmware Update for XVM296BT
    • Unzip the file
    • Copy all file into the USB thumb drive.
    • Power on the Head unit.
    • Insert the USB thumb drive in USB port
    • "Are you sure" message will pop-up on screen. Press the green check mark to continue.

Pass
16. Product: 7″ AV Media Receiver with Apple CarPlay and Android Auto – DMCPA70BT (ID: 2730)
Product URL: https://www.dualav.com/product/car/av-receivers/dmcpa70bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    Download Firmware Update for DMCPA70BT Download the firmware file from the link above.
    • Unzip the downloaded file.
    • Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    • With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the DMCP70BT USB Port.
    • Turn the vehicle On, the radio will boot up with the update screen.
    • Once the update is complete, the radio will shut down and power back up.
    • Remove the USB Thumb Drive from the unit.
    • The update is now complete.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: DMCPA70BT V1.2 - Date: 20210513_1945 - SDK: 24.0.2.2.2.0.1.0

Pass
17. Product: 6.2″ Navigation AV DVD Receiver – DVN927BT (ID: 2781)
Product URL: https://www.dualav.com/product/car/av-receivers/dvn927bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • Allows you to turn off the iPlug App in the settings menu of Bluetooth. (Default is set OFF)
    Download Firmware Update for DVN927BT
    1. Unzip the file
    2. Copy all file into the USB thumb drive.
    3. Power on the Head unit.
    4. Insert the USB thumb drive in USB port.
    5. "Are you sure" message will pop-up on screen. Press the green check mark to continue.

Pass
18. Product: 6.2″ AV Media Receiver – XVM286BT (ID: 2867)
Product URL: https://www.dualav.com/product/car/av-receivers/xvm286bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • Fixes volume issue
    Download Firmware Update for XVM286BT
    1. Unzip the file
    2. Copy all file into the USB thumb drive
    3. Power on the Head unit
    4. Insert the USB thumb drive in USB port.
    5. "Are you sure" message will pop-up on screen. Press the green check mark to continue.

Pass
19. Product: 6.2″ Navigation AV DVD Receiver – XNAV267BT (ID: 2873)
Product URL: https://www.dualav.com/product/car/av-receivers/xnav267bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • Allows you to turn off the iPlug App in the settings menu of Bluetooth. (Default is set OFF)
    Download Firmware Update for XNAV267BT
    1. Unzip the file
    2. Copy all file into the USB thumb drive
    3. Power on the Head unit
    4. Insert the USB thumb drive in USB port.
    5. "Are you sure" message will pop-up on screen. Press the green check mark to continue.

Pass
20. Product: 7″ USB Mirroring AV Media Receiver – DM70MIR (ID: 3074)
Product URL: https://www.dualav.com/product/car/av-receivers/7-screen-mirroring-media-receiver/
Firmware Links:
    If you are having issues with the USB Mirroring feature functioning properly, the below firmware download will fix the issue. Note: Software is not interchangeable between models. Please do not attempt this update on any other model other than the DM70MIR Download File:DM70MIR Firmware How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the S361T.abs file to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with the updated firmware into the CM701MIR USB Port.
    5. Turn the vehicle On , press the Home icon in the top left corner of the screen, and select USB Mirroring from the main screen. You will see the current software version towards the bottom in the middle of the screen (S361TC8HV042VW). The update is performed automatically
    6. When the message PLS reboot! Is displayed, turn the vehicle Off and remove the USB thumb drive. The update is now complete. The updated software version will now read (S361TC8HV043VW).
    7. The radio is now ready to use the USB Mirroring feature

Pass
21. Product: CD Receiver – XDM290BT (ID: 3145)
Product URL: https://www.dualav.com/product/car/headunits/xdm290bt/
Firmware Links:
    This update addresses the following: Adds the Clock Display while in Bluetooth Streaming Mode IMPORTANT : Do not interrupt power or start your vehicle while performing any firmware updates as this will potentially lock up your radio and not complete the update. Note: Software is not interchangeable between models. Please do not attempt this update on any other model other than the XDM290BT Download Firmware Update for XDM290BT Firmware Update Instructions
    1. Insert USB thumb drive with the firmware into the front panel USB port
    2. Put radio into AUX Mode and set the volume level to 00.
    3. Press the volume knob for 5 seconds to check the firmware version.(VER200824)
    4. Press the volume knob again for 5 seconds to execute the firmware update.
    5. When firmware update is completed, the radio will power off automatically.
    6. Remove the thumb drive and power the radio back on. To check that the firmware updated correctly, repeat steps 2 and 3. VER220125 will be displayed if the firmware was done correctly.

Pass
22. Product: 7″ AV DVD Receiver – XDVD179BT (ID: 3152)
Product URL: https://www.dualav.com/product/car/av-receivers/xdvd179bt/
Firmware Links:

Pass
23. Product: 6.2″ AV DVD Receiver – XDVD269BT (ID: 3162)
Product URL: https://www.dualav.com/product/car/av-receivers/xdvd269bt/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • Fixes the "USER" EQ setting to save when the car is turned off
    Note: Both CPU and MCU files must be downloaded and applied for the update to work Download Firmware Update for XDVD269BT

Pass
24. Product: 7″ AV Media Receiver – XVM279BT (ID: 3171)
Product URL: https://www.dualav.com/product/car/av-receivers/xvm279bt/
Firmware Links:
    <!--FIRMWARE UPDATES AND IMPROVEMENTS:
    • Fixes a volume adjustment issue when turning the vehicle off.
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model then the XVM279BT Download Download Instructions-->

Pass
25. Product: 7″ AV Media Receiver with Apple CarPlay and Android Auto – XDCPA10BT (ID: 3187)
Product URL: https://www.dualav.com/product/car/av-receivers/xdcpa10bt/
Firmware Links:
    <!––THIS UPDATE ADDRESSES THE FOLLOWING:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    • Adds programmable volume setting in the Settings menu
    • Adds Right-Hand Drive setting for CarPlay and Android Auto in the Settings menu
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model other than the XDCPA10BT Download Firmware Update for XDCPA10BT HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the XDCPA10BT USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: XDCPA10BT V1.2 - Date: 20220811_1110 - SDK: 24.0.2.2.2.0.1.0 - Mcu: SP_24_20201112_01––>

Pass
26. Product: 10.1″ AV Media Receiver with Apple CarPlay and Android Auto – XDCPA11BT (ID: 3197)
Product URL: https://www.dualav.com/product/car/av-receivers/xdcpa11bt/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model other than the XDCPA11BT. Download Firmware Update for XDCPA11BT HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the XDCPA11BT USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see the information listed below, the update was done correctly. - Version: V1.2 - Date: 20210513_1920 - SDK: 24.0.2.2.2.0.1.0 THIS UPDATE ADDRESSES THE FOLLOWING:
    • Adds Spanish language pack, left hand drive / right hand drive for CarPlay and Android Auto and color brightness control
    Note: Software is not interchangeable between models. Please do not attempt this update on any other model. Download Firmware Update for XDCPA11BT HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file.
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the XDCPA11BT USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, the radio will shut down and power back up.
    7. Remove the USB Thumb Drive from the unit.
    8. The update is now complete.
    To check that the update was done correctly, go to Settings and press Others and then press System Version. Look for the new version details.

Pass
27. Product: 7″ AV Media Receiver with Apple CarPlay and Android Auto – XDCPA9BT (ID: 3208)
Product URL: https://www.dualav.com/product/car/av-receivers/xdcpa9bt/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING:
    • Improves operation when older phones or non Apple cables are being used to operate the CarPlay feature
    • Improves video screen that may have had digital noise or pixilation when using older phone or non Apple cable
    Download Firmware Update for XDCPA9BT Download Instructions

Pass
28. Product: 9″ USB Mirroring AV Media Receiver – DM90MIR (ID: 3422)
Product URL: https://www.dualav.com/product/car/av-receivers/dm90mir/
Firmware Links:
    If you are having issues with the USB Mirroring feature functioning properly, the below firmware download will fix the issue. Note: Software is not interchangeable between models. Please do not attempt this update on any other model other than the DM90MIR Download File: DM90MIR Firmware How to Update:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the S361T.abs file to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off, insert the USB Thumb Drive with the updated firmware into the CM701MIR USB Port.
    5. Turn the vehicle On, press the Home icon in the top left corner of the screen, and select USB Mirroring from the main screen. You will see the current software version towards the bottom in the middle of the screen (S361TC8HV042VW). The update is performed automatically
    6. When the message PLS reboot! Is displayed, turn the vehicle Off and remove the USB thumb drive. The update is now complete. The updated software version will now read (S361TC8HV043VW).
    7. The radio is now ready to use the USB Mirroring feature

Pass
29. Product: XHUD1000 – Head Up Display and XGPS190 ADS-B Receiver with AHRS Combo (ID: 9279)
Product URL: https://www.dualav.com/product/gps-solutions/gps/xhud1000-head-up-display-and-xgps190-ads-b-receiver-with-ahrs-combo/
Firmware Links:
Model number missing from firmware URL

Fail
Discrepancy found: Model number combo not in firmware URL
30. Product: XHUD1000 Head Up Display (ID: 9329)
Product URL: https://www.dualav.com/product/gps-solutions/gps/xhud1000-head-up-display/
Firmware Links:
Model number missing from firmware URL

Fail
Discrepancy found: Model number display not in firmware URL
31. Product: XGPS190 GPS + ADS-B Dual Band Receiver with AHRS (ID: 9345)
Product URL: https://www.dualav.com/product/gps-solutions/gps/xgps190-gps-ads-b-dual-band-receiver-with-ahrs/
Firmware Links:
Model number missing from firmware URL

Fail
Discrepancy found: Model number ahrs not in firmware URL
32. Product: XGPS170D GPS + ADS-B Weather and Traffic Receiver with dual band 978/1090 MHz frequencies (ID: 9398)
Product URL: https://www.dualav.com/product/gps-solutions/gps/xgps170d-gps-ads-b-weather-and-traffic-receiver-with-dual-band-978-1090-mhz-frequencies/
Firmware Links:
Model number missing from firmware URL

Fail
Discrepancy found: Model number frequencies not in firmware URL
33. Product: XGPS160 – SkyPro GPS Receiver (ID: 9464)
Product URL: https://www.dualav.com/product/gps-solutions/gps/xgps160-skypro-gps-receiver/
Firmware Links:
Model number missing from firmware URL

Fail
Discrepancy found: Model number receiver not in firmware URL
34. Product: XGPS150A Universal GPS Receiver (ID: 9472)
Product URL: https://www.dualav.com/product/gps-solutions/gps/xgps150a-universal-gps-receiver/
Firmware Links:
Model number missing from firmware URL

Fail
Discrepancy found: Model number receiver not in firmware URL
35. Product: XGPS170 GPS (ID: 12616)
Product URL: https://www.dualav.com/product/gps-solutions/gps/xgps170/
Firmware Links:

Pass
36. Product: 7″ Car Receiver with Wireless Android Auto & Apple Carplay – DCA73W (ID: 13030)
Product URL: https://www.dualav.com/product/car/av-receivers/dca73w/
Firmware Links:
     

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DCA73W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DCA73W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: DCA73W Firmware Download

Pass
37. Product: 7″ Car Receiver with Wireless Android Auto & Apple Carplay – DMCPA703W (ID: 13362)
Product URL: https://www.dualav.com/product/car/av-receivers/dmcpa703w/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DMCPA703W

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DMCPA703W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: DMCPA703W Firmware Download


Pass
38. Product: 8” Car Receiver with Wireless Android Auto & Apple Carplay – DMCPA80FL (ID: 13363)
Product URL: https://www.dualav.com/product/car/av-receivers/dmcpa80fl/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DMCPA80FL.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DMCPA80FL USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: DMCPA80FL Firmware Download To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model DMCPA80FL. – Version: V20243012 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
39. Product: 9″ AV Media Receiver with Apple CarPlay and Android Auto – DCPA91 (ID: 13535)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa91/
Firmware Links:
Model number missing from firmware URL
    Coming Soon! Please check back.

Fail
Discrepancy found: Model number dcpa91 not in firmware URL
40. Product: 7″ Dash Mount Touchscreen with Wireless Apple CarPlay and Android – D2WC7 (ID: 13640)
Product URL: https://www.dualav.com/product/car/dash-mount/d2wc7/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING: Updates the Safety Notice screen to disappear automatically after 2 seconds without touch confirmation. Note: 1.Software is not interchangeable between models. Please do not attempt this update on any other model other than the D2WC7. 2. Do not remove the USB stick until the radio says to do so. If removed during the update, the radio will be non-functioning. Download D2WC7 Firmware Upgrade method: 1. Put all the files contained in the Software folder onto the USB thumb drive 2. Plug the USB thumb drive into the USB port of the D2WC7 and click Confirm in the dialog box. 3. The update will begin automatically and continue to upgrade the APP and MCU. 4. Once the update has completed, click OK in the dialog box when it appears.

Pass
41. Product: 8” Car Receiver with Wireless Android Auto & Apple Carplay – DCPA813 (ID: 13815)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa813/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DCPA813.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DCPA813 USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: DCPA813 Firmware Download

    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model DCPA813. – Version: V20243012 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
42. Product: 8” Car Receiver with Wireless Android Auto & Apple Carplay – DCPA81W (ID: 14381)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa81w/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DCPA81W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DCPA81W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: DCPA81W Firmware Download

    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model DCPA81W. – Version: V20243012 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
43. Product: 7″ AV Media Receiver with Wireless Apple CarPlay, Android Auto, and Camera Combo – DCPA701W-BC (ID: 15495)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa701w-bc/
Firmware Links:
Model number missing from firmware URL
    THIS UPDATE ADDRESSES THE FOLLOWING:
    • Improves the screen resolution while in Apple CarPlay or Android Auto
    • Fixes an issue when using the Waze app
    • Improves USB random playback issue
    Download HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the DCPA701W USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    7. Delete the 2 ISPBOOT files from the thumb drive and place the sppf_Autochips.img and DownLoad.bin file onto the USB stick and repeat the same update.
    8. The updates are now completed.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: DCPA701W - Date: 20210904_1712 - SDK: 53.0.5.0.0.0.2.1 - MCU: SP_A_303_20210806_01.AJO.E THIS UPDATE ADDRESSES THE FOLLOWING:
    • Updates GPS location
    Download HOW TO UPDATE:
    1. Download the firmware file from the link above.
    2. Unzip the downloaded file. (NOTE: To unzip the file, the program WINRAR is required and can be downloaded from this link: https://www.rarlab.com/download.htm)
    3. Copy the 2 ISPBOOT.BIN files to an empty USB Thumb Drive formatted to FAT32.
    4. With the vehicle Off , insert the USB Thumb Drive with Update Firmware into the DCPA701W USB Port.
    5. Turn the vehicle On, the radio will boot up with the update screen.
    6. Once the update is complete, remove the USB thumb drive and turn the radio off and then back on so the firmware update is completed.
    7. The updates are now completed.
    To check that the update was done correctly, goto Settings and press Others and then press System Version. If you see he below information, the update was done correctly. - Version: DCPA701W - Date: 20220123_1647 - SDK: 53.0.5.0.0.0.2.1 - MCU: SP_A_303_20210806_01.AJO.E

Fail
Discrepancy found: Model number dcpa701w-bc not in firmware URL
44. Product: 10.1″ Receiver with Wireless Android Auto & Apple CarPlay – DCPA1013 (ID: 15666)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa1013/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DCPA1013.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DCPA1013 USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: DCPA1013 Firmware Download

    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model DCPA1013. – Version: V20243012 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
45. Product: 7″ Media Receiver with Wireless Android Auto & Apple Carplay – DCPA723W (ID: 16526)
Product URL: https://www.dualav.com/product/car/av-receivers/dcpa723w/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DCPA723W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DCPA723W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: DCPA723W Firmware Download


Pass
46. Product: 10.1” Car Receiver with Wireless Android Auto & Apple Carplay – DMCPA10W (ID: 16857)
Product URL: https://www.dualav.com/product/car/av-receivers/dmcpa10w/
Firmware Links:

    Firmware Update Instructions

    This update addresses the following:

    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).

    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DMCPA10W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DMCPA10W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.

    Download Firmware Zipped File: DMCPA10W Firmware Download

    To check that the update was done correctly, go to Settings and press Others and then press System Version. If you see the following information, the update was done correctly for model DMCPA10W. – Version: V20243012 – Date: 20240311 – SDK: MJ2.2 54.0.20.0.2.6.1.0 – MCU: GD72-230712

Pass
47. Product: 7″ Dash Mount Touchscreen with Wireless Apple CarPlay and Android – DMD7W (ID: 18349)
Product URL: https://www.dualav.com/product/car/dash-mount/dmd7w/
Firmware Links:
    THIS UPDATE ADDRESSES THE FOLLOWING: Updates the Safety Notice screen to disappear automatically after 2 seconds without touch confirmation. Note: 1.Software is not interchangeable between models. Please do not attempt this update on any other model other than the DMDW7. 2. Do not remove the USB stick until the radio says to do so. If removed during the update, the radio will be non-functioning. Download DMD7W Firmware Upgrade method: 1. Put all the files contained in the Software folder onto the USB thumb drive 2. Plug the USB thumb drive into the USB port of `the DMDW7 and click Confirm in the dialog box. 3. The update will begin automatically and continue to upgrade the APP and MCU. 4. Once the update has completed, click OK in the dialog box when it appears.

Pass
48. Product: 6.2″ AV Media Receiver – XVM296BT (ID: 18855)
Product URL: https://www.dualav.com/product/car/av-receivers/xvm296bt-old/
Firmware Links:
    FIRMWARE UPDATES AND IMPROVEMENTS:
    • Fixes volume issues.
    Download Firmware Update for XVM296BT
    • Unzip the file
    • Copy all file into the USB thumb drive.
    • Power on the Head unit.
    • Insert the USB thumb drive in USB port
    • "Are you sure" message will pop-up on screen. Press the green check mark to continue.

Pass
49. Product: Test Template Page – Fake Model (ID: 21531)
Product URL: https://www.dualav.com/product/car/av-receivers/test-template/
Firmware Links:
    <!--

    Firmware Update Instructions

    This update addresses the following:
    • Improved touchscreen response time.
    • Change the Safety Notice screen to disappear automatically after 2 seconds.
    • Change Rear Camera View settings from on to off (default: OFF).
    • Add Time Sync Settings - OFF/GPS/RDS/Phone (default: OFF).
    Note: Software is not interchangeable between models. Please do not attempt this update on any model other than the DCPA723W.

    How to Update:

    1. Download the firmware file from the link below.
    2. Unzip the downloaded file. Note: To unzip the file, the program WINRAR is required and can be downloaded from this link: WINRAR Download
    3. Copy the ISPBOOT.BIN file to an empty USB Thumb Drive formatted to FAT32.
    4. Insert the USB Thumb Drive with Update Firmware into the DCPA723W USB/Charging Port.
    5. Navigate to Settings and scroll till you get to the About button on the left side of the menu.
    6. Press the About button and you will see on the right-hand side Software Update.
    7. Press Software Update and you will see the Update button. Press Update to begin the firmware upgrade.
    8. Once the update is complete, remove the USB thumb drive.
    9. The update is now complete.
    Download Firmware Zipped File: DCPA723W Firmware Download-->

Pass
50. Product: Gauge Hole Media Receiver – MGH5 (ID: 22172)
Product URL: https://www.dualav.com/?post_type=product&p=22172
Firmware Links:
Model number missing from firmware URL
    THIS UPDATE ADDRESSES THE FOLLOWING: 2-ZONE SPEAKER CONTROL How to update:
    1. Copy all file into the USB thumb drive.
    2. Power on the Head unit
    3. Insert the USB thumb drive in USB port.
    4. The firmware will begin automatically
    5. When the firmware has completed, remove the USB thumb dive to resume normal operation.
    To adjust the updated 2-Zone speaker control: Long press Preset/Play/Pause button then it will cycle through the zone selection options as follows.
    1. Factory Default : Zone 1 + Zone 2
    2. Zone 1
    3. Zone 2

Fail
Discrepancy found: Model number mgh5 not in firmware URL
51. Product: Gauge Hole Media Receiver – MXSGH50 (ID: 22456)
Product URL: https://www.dualav.com/?post_type=product&p=22456
Firmware Links:
Model number missing from firmware URL
    THIS UPDATE ADDRESSES THE FOLLOWING: 2-ZONE SPEAKER CONTROL How to update:
    1. Copy all file into the USB thumb drive.
    2. Power on the Head unit
    3. Insert the USB thumb drive in USB port.
    4. The firmware will begin automatically
    5. When the firmware has completed, remove the USB thumb dive to resume normal operation.
    To adjust the updated 2-Zone speaker control: Long press Preset/Play/Pause button then it will cycle through the zone selection options as follows.
    1. Factory Default : Zone 1 + Zone 2
    2. Zone 1
    3. Zone 2

Fail
Discrepancy found: Model number mxsgh50 not in firmware URL
This site uses cookies to offer you a better browsing experience. By browsing this website, you agree to our use of cookies.
More info Accept